• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

SealerOn Induction Sealing

  • Home
  • SealerOn™ Induction Sealing
    • SealerOn™ Induction Machines – Take a Closer Look
    • SealerOn™ Mini
    • SealerOn™-100 Affordable Entry Level Induction Machine
    • SealerOn™ 400
    • SealerOn™ 3000
    • SealerOn™ 3000 Large Caps
    • SealerOn™400 Flat, Spout and Flip Caps
  • MeRo Sealer Machine Introduction
    • MeRo Induction Machines – Take a Closer Look
    • MeRo 1KW Air Cooled Bottle Sealer
    • MeRo 2KW Air Cooled Induction Sealer
    • MeRo Flat Caps
    • MeRo™ Specialty Caps
  • Capless Induction
    • Capless Induction Machines – Take a Closer Look
    • Packaging in Glass or PET When Considering Induction Seal
  • Heat Sealing
  • Contact Us
  • Blog

Capless sealing

Induction Sealing Onto Glass: A Breakthrough in Induction Technology

Induction Sealing Onto Glass

Induction sealing onto glass jars was previously an impossible task. In the past, achieving tamper evidence for glassware was accomplished through the use of Heat Shrink Tamper Bands which proved disadvantageous. They were difficult to apply in production; they were difficult to remove for the end user. They were often dust traps and even appeared to attract dust to the product.

Now, however, with induction sealing, we no longer need to worry about such dilemmas. Sealing onto glass is executed through a Foil-Under-Cap Approach where the cap is loaded with an induction foil when it is placed onto the container. This allows for tamper evidence and a secure seal for the product.

What are the advantages of Capless Sealing?

  • It enables induction sealing of containers with metal caps without the risk of them heating too much and becoming volatile and unsafe for product contact. This is achieved because the capless sealing process takes place prior to the metal cap being placed onto the container.
  • It allows for much higher contact pressure of the sealing foil during the induction process, making sure that the foil remains bonded with time.

Connect with Us

With our unique expertise and range of capless induction sealing equipment, we can solve all your capless induction sealing challenges—be they on a small or large scale! Let us guide and supply you with the most cost-effective induction sealing material to suit your process.

Contact us here.

Capless Induction Sealing Glass Bottles with Metal Lids

Capless Induction Sealing with Metal Lids

This is SealerOn’s 5-head capless induction sealing machine. With this, dry products packed into glass can be induction sealed—even if the package has a metal lid. The machine fills the glass jars, adds a desiccant and then the Capless Induction Sealing Process takes place. Finally, an attractive metal cap is placed over the sealed top of the glass jar.

Products are finished in a high-end glass package with tamper evidence and a moisture and oxygen barrier with close to zero transmission rates.

How does our 5-Head Capless Induction Sealing Machine do it?

Rolled induction sealing material is cut and applied to the top sealing surface of the vial. Our unit has 5 filling sealing heads allowing for higher processing speeds. The sealing cycle then lasts 0.2 to 0.4 seconds introducing only minimal heat energy to produce the seal.

Key Benefits to Capless Induction Sealing

  • 100% visual inspection of the seal is possible.
  • More pressure can be applied at the time of sealing resulting in a better and more even contact during the induction sealing cycle.
  • For single-use containers, the process can eliminate the need for multi-layer cap lining or even eliminate the need for a cap altogether.
  • For containers with metal/metalized plastic caps, tamper evidence is still achievable along with a moisture and oxygen barrier with close to zero transmission rates.

Connect with Us

With our unique expertise and range of capless induction sealing equipment, we can solve your product challenges—whether they be on a smalll or large scale! Allow us to guide and supply you with the most cost-effective and reliable induction sealing materials to suit your process.

Contact us here.

Primary Sidebar

Labeling Equipment
  • Home
  • SealerOn™ Induction Sealing
    • SealerOn™ Induction Machines – Take a Closer Look
    • SealerOn™ Mini
    • SealerOn™-100 Affordable Entry Level Induction Machine
    • SealerOn™ 400
    • SealerOn™ 3000
    • SealerOn™ 3000 Large Caps
    • SealerOn™400 Flat, Spout and Flip Caps
  • MeRo Sealer Machine Introduction
    • MeRo Induction Machines – Take a Closer Look
    • MeRo 1KW Air Cooled Bottle Sealer
    • MeRo 2KW Air Cooled Induction Sealer
    • MeRo Flat Caps
    • MeRo™ Specialty Caps
  • Capless Induction
    • Capless Induction Machines – Take a Closer Look
    • Packaging in Glass or PET When Considering Induction Seal
  • Heat Sealing
  • Contact Us
  • Blog

Footer

  • The SealerOn™ 3000: Versatility at Its Finest
  • The SealerOn™ Bottle Capping Machine: Economic, Efficient, Exceptional
  • Induction Sealing Onto Glass: A Breakthrough in Induction Technology
  • Capless Induction Technology: Improve Exponentially

USA Office

Adeneli Packaging
Los Angeles, CA, USA
Dial 844-ADENELI (844-233-6354)
Sales Extension 1
Support Extension 2
Billing Extension 3
Email Us: usa@label-on.com
Fax: 310-935-0310

Chat Now
Visit Our Channel

Copyright 2023 Adeneli Packaging ·